Hager – 8318 – PUSH – 36” Low Energy Auto Operator for Single Door Openings / Non-Handled / 8300 Series / ALM / REV 1

Specifications:

- Accessories

2-679-0905 – Standard Arm Extension ALM 2-679-0906 – Standard Arm Extension BLK 2-679-0907 – KP EVO Programming Device (Required for advanced programming features.)

- Adjustable Opening/Closing Speeds

Yes – Exceeds all ADA requirements.

- Adjustable Swing Degree

80° to 140°

- Applications

For use on fire-rated and non-fire-rated openings Exterior Doors: Yes (Interior side only) Works on both outswing or inswing doors Adjustable Opening Angle: Max Degree of Swing Powered -180 degrees (pull), 140 (push) Opening Force: 8 lbs.

- Certifications

ANSI/BHMA A156.19 Certified for doors up to 48″ wide and 200 lbs Complies with all U.S. and Canada ADA requirements for low energy operators UL/cUL (Fire rating) Listed for up to 3 hours UL10C Positive Pressure Rated UL325 Listed

- Closing Force

>8 lbs.

- Door Width

36”, 42”, 44”, 48” (Non-Standard Sizes Available)

- Electrical Specifications

Power Requirements: 115 VAC 60 HZ Current Draw: 0.4 A to 1.2 A (Max) Fused Protection: 3.15A fuse Onboard Power Supply: 24 VDC 1 A Electric Lock Relay: 5.0A @ 28 VDC Form “C” SPDT

- Features

Non-handed Operates as a manual closer with or without power Onboard power supply for accessories i.e. electric and magnetic locks, sensors, etc. Built-in adjustable door stop for protection against wind or abusive environments Blow open function for for smoke ventilation (alarm contacts) Equipped with cycle count Factory setting for ANSI 156.19 speed requirements AND hold time delay Night mode allows the exterior actuator to be deactivated by a rocker switch on the side of the operator On/Off/Hold Open Switch: Standard Fire Alarm input shunts swing activations until FACP is manually reset Memory is flash upgradeable

- Fire Rating

UL/cUL (Fire rating) Listed for up to 3 hours

- Maximum Door Weight

350 lbs.

- Maximum Door Width

5′

- Notes

For stocking distributors, operators and arms can be ordered separately allowing for reduced inventory and greater flexibility. See the price book for additional information. Order form required for all Hager low energy operators. Order form can be found under Related Files. Please complete and submit with purchase order. For High usage openings or abusive environments, Hager recommend using a 7000 Series Overhead Stop.

- Operating Temperature

-4°F to + 131°F

- Programmable Functionality

Boost on close – selectable power assist and additional force for the last 10 degrees of closing Adjustable Opening Force Limitation Adjustable Opening and Closing Speeds Adjustable Hold Open Time for Door Activators

- Reveal

Push Arm: 8″ (Reveals between 9-3/4″ and 19″, arm extension must be ordered separately) Pull Arm: 0″

- Size

5″ H x 4-1/2″ D x Length equals opening width plus 3″

- Warranty

2 Year