Pemko – Full Surface Center Pivot Hinge – Clear

Finish

:

CFSCP:

C – Clear Anodized Aluminum

- Width

1-3/16” (30.2 mm) (frame side – leaf).

- Width

2” (50.8 mm) (door side – leaf).

- Width

3-3/16” (80.9 mm) (total width of hinge).

- Cap Width

25/32” (19.8 mm).

- Height

3/4” (19.1 mm) (total height of hinge).

Standard Duty Anodized Aluminum Center Pivot Continuous Geared – designed mainly for retrofit work and are applied to the exposed surfaces of the door and frame. Also available in heavy duty models. - Easily replace butt hinges since no door or frame adjustments are necessary and are more versatile with restricted frame faces. - Fasteners – Frame Portion – Fasteners are No. 12-24 x 7/16″ #10 Head Pan Head Type C thread forming, no tapping required. - Standard model: 12 fasteners required for each leaf. - Wood screws available on request (specify on order). - Fasteners – Door Portion – a. Thru-bolt – 1/4-20 x 1-5/8″. – Standard Duty Hinges – 4 required. – b. Shoulder Bolt – 1/4-20 x 1″ PCH. – Standard Duty Hinges – 4 required. – c. Pan Head Self Drilling #12 x 3/4″. – Standard Duty Hinges – 6 required. - Standard duty hinges conform to Grade 3-150 and Grade 3-300 cycle requirements per BHMA standard ANSI/BHMA A156.26-2006. - Tested and certified by Underwriters Laboratories Inc. (USA and Canada) to standard UL10B, UL10C and UBC 7.2 (positive pressure) for up to a 3-Hour (A-Label) fire listing for all 4 ft. 0 in. x 10 ft. 0 in. and 8 ft. 0 in. x 10 ft. 0 in. door and frame assemblies. Fire listing certifications apply to all approved hollow metal and wood door assemblies in drywall or masonry construction. - Aluminum continuous hinge for use on swinging type fire doors of the hollow metal, tin-clad, sheet metal and steel covered composite type rated up to 3 hours, wood covered composite type rated up to and including 1-1/2 hours. Also wood core rated up to and including 20 minutes without hose stream. - All hinges meet criteria of UBC 7.2 for positive pressure. - Special FirePins are only required on 3-Hour (A-Label) assemblies. - Certain door and frame conditions may require an extra 1/32″-1/16″ clearance. Excessive clearance on fire rated assemblies may violate the requirements for NFPA 80. - PemkoHinge ® products are guaranteed for the life of the opening against defects in material or workmanship with the exception of AL, RS, standard duty and Grade 3 hinges, which carry a 10 year warranty. - Width: 1-3/16” (30.2 mm) (frame side – leaf). - Width: 2” (50.8 mm) (door side – leaf). - Width: 3-3/16” (80.9 mm) (total width of hinge). - Cap Width: 25/32” (19.8 mm). - Height: 3/4” (19.1 mm) (total height of hinge). Ratings: BHMA Certified Fire Rated – UL10C – Positive Pressure PemkoHinge Fire Rating – UL76Y2 Finish : CFSCP: C – Clear Anodized Aluminum